S.E.T.® 16792 Weighing Indicator Controller

S.E.T.® 16792 Weighing Indicator Controller

 

SET16792

  • Good consistency, no need to re-calibrate a scale if change the former indicator, just input the recorded former indicator, just input the recorded former calibration parameter
  • Software on-line update and modification locally or by ISP
  • Printing content and format user-defined

Technical parameter

  • Accuracy: Class III, n-5000
  • A/D conversion method: Σ-Δ
  • Input signal range: -30mV~30mV
  • A/D conversion speed: 200times/sec
  • Nonlinearity: ≤0.0015%F.S
  • Load Cell Excitation: DC: 5V; I : 120mA
  • Maximum connection number of load cells at 350Ω or load cell at 700Ω
  • Load cell connection mode: 6 wire, auto compensation for long distance
  • Max. sensitivity: 0.5uV/d
  • Display: 7 bits LED display, 7 status indication, 3 battery indication
  • Clock: real clock without effect on power off
  • Scoreboard interface (Standard)
    Serial sending by 20mA current loop with baud rate 600
  • Communication interface (RS232 C ctandard; RS422 optional)
    Serial communication interface, with selectable baud by continuous sending method or on command method.
    Transmission distance: RS232C<30m; RS422< 1200m
  • Print interface (Standard)
    Parallel sending, able to connect with wide-lone printer model
    KX-P1121, KX-P1131, LQ300K; micro printer for model D10P
  • Power supply: AC 187~242V, 49~51Hz; DC 6V/10AH battery (battery Outside)