Axle Weigher
RW-PLZ
Road Weigher
RW-PLZ is easy portable set of vehicle weighing scale that is usually used to weigh the road
vehicles. RW-PLZ consists of weighing platform scale and indicator, and both are designed
to endure rough environment.
Waterproof Structure (IP67, CAPS Waterproofing upgraded)
LOADCELL : CPAS LOADCELL
INDICATOR(Built-in type) : MAIN PCB ASS’Y, BATTERY
Weighing-in-Motion (WIM)
- RW-PLZ has both static and dynamic weighing(Weighing in Motion) function.
- Via WIM function, users can conveniently measure a vehicle’s weight.
- In case of WIM, dummy pads are required and accuracy is +/-3%
when vehicle speed is under 10km/h
RW-5002PL
Wireless Communication System
Users can measure a weight via wireless communication (Bluetooth) much easier and more comfortable than via a wire communication, and maintenance cost of wire will be reduced. Also, RW-5002PL indicator can be connected up to 12 RW-PLZ platforms simultaneously.
Built-in Thermal Printer
Built-in thermal printer enables to print out various contents such as company,
inspector, driver and weight data easily.
PAD
SPECIFICATIONS (BODY)
Platform Size (mm) | 900x500x34 | 700x500x34 | 500x400x34 |
Body Weight (kg) | 30kg or less (incl. Display Module) |
25kg or less (incl. Display Module) |
20kg or less (incl. Ramp, Display Module) |
CAPA(ton) | 20, 15, 10 | 15, 10, 5 | 5, 2, 1 |
Division(kg) | 20, 20, 10 | 20, 10, 5 | 5, 2, 1 |
Protection Class | IP67 or higher |
SPECIFICATIONS (DISPLAY MODULE)
DISPLAY | 5digit LCD (excl. “-”), 15mm high digits, backlight |
KEY | On/OFF, Zero, Sum (kg/lb), Light |
Protection Class | IP67 or higher |
Communication Type | BLE |
Communication Distance | 100m or greater |
A/D Conversion Speed | Static weighing: 10 times/sec, Dynamic weighing: 100 times/sec |
Battery Power | 3.7V / 4Ah (Li-ion 9,000mAh) |
Run Time / Charge Time | 170 hrs / 12 hrs |
Charging Type | Battery removable type |
Content of Display | Refer to Sheet for detail of display |
Main Functions | Set weight dependent speed (low speed ~ high speed) Set auto calibration scope Set dynamic or static weight (WIM) / WIM spec: Accuracy +/- 3% in motion no less than 10 km/h When WIM is enabled, displays SLOW or FAST depending on vehicle incoming speed |
Option | A structure without display |
INDICATOR
SPECIFICATIONS
DISPLAY | GRAPHIC LCD WITH BACKLIGHT |
Battery power | Use conventional RW-5002PL battery |
Use time b/w charges | Up to 40 hours |
Charging | 8 hours |
Printer | Thermal |
Communication type | BLE |
Interconnect platforms up to | 12 pcs |
Weight (kg) | 4.5 |
Option | Cigar jack power |
DATA communication type | RS-232C / USB (for data backup) |
Memory | Large memory capacity of 10,000 or more data sets based on 6 truck axles |
PC PROGRAM | Store/manage data thru USB or RS-232C |
App | Check/save weights via interface with indicator or PAD |
Certification | EMC certified locally |