 Application |
S.E.T. 16792
Weighing Indicator Controller
- Good consistency, no need to re-calibrate a scale if change the former indicator, just input the recorded former indicator, just input the recorded former calibration parameter
- Software on-line update and modification locally or by ISP
- Printing content and format user-defined
|
Technical parameter
- Accuracy: Class III, n-5000
- A/D conversion method: Σ-Δ
- Input signal range: -30mV~30mV
- A/D conversion speed: 200times/sec
- Nonlinearity: ≤0.0015%F.S
- Load Cell Excitation: DC: 5V; I : 120mA
- Maximum connection number of load cells at 350Ω or load cell at 700Ω
- Load cell connection mode: 6 wire, auto compensation for long distance
- Max. sensitivity: 0.5uV/d
- Display: 7 bits LED display, 7 status indication, 3 battery indication
- Clock: real clock without effect on power off
- Scoreboard interface (Standard)
Serial sending by 20mA current loop with baud rate 600
- Communication interface (RS232 C ctandard; RS422 optional)
Serial communication interface, with selectable baud by continuous sending method or on command method.
Transmission distance: RS232C<30m; RS422< 1200m
- Print interface (Standard)
Parallel sending, able to connect with wide-lone printer model
KX-P1121, KX-P1131, LQ300K; micro printer for model D10P
- Power supply: AC 187~242V, 49~51Hz; DC 6V/10AH battery (battery Outside)
|
|
